fits model: Fwd, Verano. make: Buick. year: 2012.

( Model: VERANO ), ( Part Type: Wire Pedal Drive ), ( Conditions Options: 2.4, At, 90k, Fwd, Sdn, Dbw Pedal ), ( Genuine Oem: Yes ), ( Ipn: 234.gm4e12 )
The Buick Verano 2012 4-liter Front-Wheel Drive (FWD) Accelerator Pedal DBW Drive Wire is an essential component of the vehicle's electronic throttle control system. This drive wire, specifically the GM Part Number 23475506, is a critical link between the accelerator pedal assembly and the powertrain control module (PCM). It is part of the Drive-by-Wire (DBW) system, which enables electronic control of the throttle instead of a traditional cable linkage.
This Buick Verano accelerator pedal DBW drive wire measures approximately 33 inches (83.82 centimeters) in length and features a single, eight-pin connector at each end. The connector pins house several signals including throttle position sensing, vehicle speed sensing, and pedal position sensing. The connector at the pedal end is located underneath the hood in the engine compartment, and the connector at the PCM end is found within the passenger compartment, near the driver's side footwell.
The DBW drive wire is designed to convey precise signals between the accelerator pedal assembly and the powertrain control module. It utilizes multiple wires for power, ground, and various signal communications. Each individual wire is shielded, ensuring protection against electromagnetic interference (EMI) and radio frequency interference (RFI), guaranteeing accurate signal transmission.
The Buick Verano 2012 4-liter FWD Accelerator Pedal DBW Drive Wire is a high-quality automotive component, engineered for reliable and consistent performance. When functioning properly, this drive wire enables the vehicle to respond smoothly to the driver's throttle inputs while optimizing fuel economy and maintaining optimal engine performance.
However, if the DBW drive wire experiences any damage, such as breaks or shorts in individual wires, it can disrupt signal transmission and hinder acceleration. If you suspect an issue with your accelerator pedal DBW drive wire, it's recommended to consult a professional automotive repair technician for diagnostic, replacement, or repair services.
Buying a Buick Verano with the 2012 4L FWD engine and DBW ( Drive-by-Wire) accelerator pedal involves considering both its advantages and disadvantages. Below are some potential pros and cons:
Pros:1. Smooth Acceleration: The Drive-by-Wire (DBW) accelerator system provides smoother and faster acceleration response as compared to conventional cable-driven systems. This system reads pedal position electronically and sends a signal to the engine to adjust throttle opening accordingly.
2. Better Fuel Economy: DBW systems are designed to optimize fuel economy by adjusting throttle opening based on driving conditions and required engine power. This can result in improved fuel efficiency.
3. Enhanced Driveability: The DBW system enables vehicle features like Sport Mode, which improves vehicle performance by delivering a more responsive driving experience.
4. Reduced Weight: A DBW system, including the accelerator pedal mechanisms, tends to be lighter than traditional cable-driven setups. This can contribute to vehicle weight reduction and potential fuel savings.
Cons:1. Increased Complexity: DBW systems involve more advanced electronic components and wiring than traditional mechanical systems. This may result in increased maintenance and repair costs should any issues arise.
2. Risk of System Failure: DBW systems are dependent on the reliability and functionality of the electronic components included in the system. If a failure occurs, it may result in driving difficulties.
3. Higher Initial Cost: Replacing or repairing a DBW accelerator pedal system can be more expensive compared to a conventional cable-driven system, as the specialized parts and labor required are typically more costly.
4. Limited Availability: dbw components, specifically for specific makes and models like the 2012 Buick Verano, may not be easily available in the aftermarket, which can make repairs more challenging.
Conclusion:When deciding to buy a Buick Verano with the 2012 4L FWD engine and DBW accelerator pedal, it is crucial to weigh the potential advantages, including smooth acceleration, improved fuel economy, enhanced driveability, and reduced weight, against the disadvantages, such as increased complexity, risk of system failure, higher initial cost, and limited availability of replacement parts. Considering your personal driving habits and priorities, the overall benefits may outweigh the costs for those who prioritize smooth and responsive acceleration and improved fuel economy. However, if you prefer a simpler and more mechanically driven vehicle with readily available repair options, this system may not be the best choice for you.
Recommendation:If you're a technologically inclined driver who appreciates a responsive and efficient driving experience, and you're willing to accept the potential risks and costs associated with DBW systems, then go ahead and make the purchase. However, if the added complexity and uncertainty of potential repair issues discourages you, it might be worth considering a vehicle with a more conventional accelerator pedal system. Always remember to consult with a trusted mechanic or automotive expert before making a final decision to ensure you have a complete understanding of the implications of this specific system.
Vehicles and parts that are painted at different times in assembly plants will never be a perfect match. Radiators and heaters are guaranteed not to leak at time of purchase. All used parts or merchandise must be inspected by buyer for defects safety hazards. No warranty on labor.