RADIUM ENGINEERING 20-0238-FL Catch Kit Pcv Fluid Lock

( Brand: Radium Engineering ), ( Manufacturer Part Number: 20-0238-FL ), ( Part Type: Fluid Lock )

Review RADIUM ENGINEERING Catch Can Kit For Pcv Fluid Lock fits TUNDRA 2007–2021

Introducing the Radium Engineering 20-0238-FL Catch Kit for 2007-2021 Toyota Tundra PCV systems, a must-have upgrade for your vehicle's engine performance and longevity. This catch kit is specifically designed to address the common issue of fluid lock in the Positive Crankcase Ventilation (PCV) system of your Toyota Tundra.

The Radium Engineering 20-0238-FL Catch Kit is an engine component that ensures the proper flow of crankcase gases from the engine to the intake system. The PCV system is crucial for reducing crankcase pressure and preventing harmful emissions from escaping into the atmosphere. However, in some cases, the PCV system can become fluid-locked, leading to decreased performance and potential engine damage.

This catch kit is designed to prevent fluid lock by providing a reliable and efficient method for separating crankcase gases from condensation and excess oil. The kit includes a high-quality, billet aluminum catch can with an integrated breather, a 6-inch length of 3/8-inch diameter, -6AN polished stainless steel line, and a -6AN to -10AN adapter for easy installation.

The billet aluminum catch can is designed to withstand the rigors of off-road use and high-performance applications. It features a large, 1-quart capacity that can accommodate a significant amount of crankcase gases before requiring emptying. The integrated breather ensures that fresh air is continually supplied to the crankcase, maintaining optimal pressure and preventing vacuum conditions that can contribute to fluid lock.

The polished stainless steel lines are not only attractive but also durable and resistant to corrosion. The lines are designed to be easy to install, with a straightforward connection to the catch can and the engine's PCV system using standard fittings.

In summary, the Radium Engineering 20-0238-FL Catch Kit for 2007-2021 Toyota Tundra PCV systems is an essential upgrade for any enthusiast looking to improve their vehicle's performance and protect their engine from fluid lock. With its high-quality materials, efficient design, and easy installation, this catch kit is a worthwhile investment for any Tundra owner.

Radium Engineering's 20-0238-FL catch kit is designed to address the PCV (Positive Crankcase Ventilation) system issues in 2007-2021 Toyota Tundra vehicles. This kit aims to eliminate the fluid-lock issue that occurs when the PCV valve fails, causing a loss of engine vacuum and potential engine damage. Let's examine the pros and cons of investing in this Radium Engineering catch kit.

1. Eliminates PCV fluid-lock issues: The primary advantage of this catch kit is its ability to prevent and resolve fluid-lock issues that can negatively impact the performance and longevity of the engine.

2. Improves engine performance: By addressing the PCV system's issues, this catch kit can help improve engine performance, including better idle stability and increased power output.

3. Easy installation: The kit is designed for easy installation, and the included instructions and hardware make the process straightforward for most DIY enthusiasts.

4. High-quality materials: Radium Engineering is known for its high-quality parts, and this catch kit is no exception. The components are engineered to provide reliable and long-lasting performance.

5. Enhances engine longevity: By preventing fluid-lock issues and their associated engine damage, this catch kit can contribute to the overall longevity of the engine.

1. Cost: The Radium Engineering catch kit is a more expensive solution compared to some aftermarket alternatives or OEM parts. However, the premium price tag is due to the high-quality materials and engineering that goes into the kit.

2. Requires some mechanical knowledge: While the installation process is relatively straightforward, some DIY enthusiasts may require a solid understanding of engine systems and components to complete the installation successfully.

In conclusion, the Radium Engineering 20-0238-FL catch kit offers several advantages, including the elimination of PCV fluid-lock issues, improved engine performance, and enhanced engine longevity. Although it comes with a higher price tag compared to some alternatives, the high-quality materials and engineering justify the investment for those seeking reliable and long-lasting solutions. Overall, we recommend this catch kit for Toyota Tundra owners looking to address PCV system issues and improve their engine's performance and longevity.

Details:

Excessive oil collection Can be an indicator of a damaged engine. They do NOT vent to atmosphere VTA, thus are emissions and track legal. Lowers hydrocarbon emissions -Capacity: 7 fluid ounces - height without fittings: 5 inches Outside Diameter: 2.45 inches, TUNDRA CATCH CAN KIT OPTIONS Radium Engineering offers two independent Tundra oil catch Can kits that are sold individually or together. I may ship using USPS, FedEx, or UPS.

If a mistake was made by us, we ill provide return shipping label for you to use make the exchange as seamless possible. Conversely, the PCV hose will experience metered vacuum when engine is idling, low load cruising, and decelerating. There is no drilling or permanent modifications required. 20-0238-FL Catch Can Kit, 07-21 Tundra, PCV, Fluid Lock This installation kit was specifically designed for the Toyota Tundra with 3UR-FE engine.

Features: Effectively raises the octane and increased engine performance from cleaner inlet air Prevents oil buildup in intake or inter cooler system walls, throttle body, manifold, etc. The 20-0238-FL PCV Catch Can Kit, Fluid Lock runs inline with the positive crankcase ventilation valve. Radium Engineering catch Cans feature large 10AN ORB ports, a 4AN drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Furthermore, closed systems prevent unwanted oil vapors from entering into the cabin.

Factors that include my selection is the best time or carrier limitation to ship you. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Closed loop systems route clean filtered air back in through the engine to be burned and promote negative crankcase pressure for optimal performance. When the intake manifold pressure is close to or greater than atmospheric pressure, PCV check valve closes and, thus, this hose experiences no flow.

An oil catch Can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated everyday driving. If the item is coming back in stock within two weeks, we'll ask if you want to keep it on order. Note: Because the Radium catch Cans are pressure sealed, they great for boosted applications as well so connecting to intake manifold is permitted. Warranty All warranty is handled through manufacture.

part #: 200238 price

• $251.70

specifications airfueldepo:

• for models: Tundra
• for makes: Can
• for years: 2007-2021
• brand: Radium Engineering
• mpn: 20-0238-fl
• part type: Fluid Lock

payments airfueldepo:

• credit card: Visa
• wallet: Google-pay
• other

offer airfueldepo:

• started: March 30, 2025
• sold: 0
• best offers: True
• options: Ship-to-home
• availability: In Stock
• quantity: 3

shipping airfueldepo:

• cost: $0.00
• class: Standard
• type: Fixed
• service: Standard
• transit: 4-9 Days

general airfueldepo:

• condition: New
• Car Truck Parts Accessories > Air Fuel Delivery > Other Air Fuel Delivery

seller airfueldepo:

• # reviews: 835
• city: Baldwin Park, California
• rating: 99.0%

returns airfueldepo:

• paid by: Buyer
• time: 30 Days
• policy: Returns Accepted

Radium Engineering 20-0238 Is Similar To:

• Radium 20-0015 Fuel Surge Tank Engineering (30.8% similar) It was still working just fine before it taken out of the car. Also comes with harness. I am switching to a fuel cell setup so no longer need it. Selling a Radium surge tank with twin racetracks E85 rated 255 fuel pumps...(September 13th, 2024)
• Radium Engineering 20-0626 (47.5% similar) The compatibility section is not always 100% accurate. Fast free, shipping: brand Radium Engineering, part number 20-0626, UPC code, condition new. This item comes with the full manufacturers warranty...(December 16th, 2024)
• Radium Engineering 14-0358 For 3 8in Sae Male To 1 8in Npt Fitting (48.2% similar) Manufacturer: Radium Engineering, part number: 14-0358, condition: new: 3/8IN sae male to 1/8NPT CBC machined from steel and then zinc plated. Compatible with any 3/8 sae quick connect female fitting. Title: 14-0358 3/8SAE to 1/8NPT...(December 30th, 2024)
• Radium Engineering 20-0860 (49.5% similar) Actual product may differ from the item shown in photograph. In-tank fuel surge tank. Provides extra fuel pump for port injection on the 5.2 V10 fits Audi engines. Photos are for reference only...(January 1st, 2025)
• Radium Engineering 20-0640-00 (48.1% similar) Actual product may differ from the item shown in photograph. Newly re designed in-tank fuel hanger for the fits Mitsubishi evolution can hold one or two pumps. E85 compatible. Photos are for reference only...(January 2nd, 2025)
• Radium Engineering 20-0901-fl (50% similar) Interfaces with the pcv replacement valve hose to filter out oil and other contaminants.featuring Radium's new fluid lock catch can technology patent pending. Actual product may differ from the item shown in photograph. Single catch can kit for the Toyota 86/FITS scion fr-s/fits Subaru BR, 2012 ...(January 2nd, 2025)
• Radium Engineering 20-1000-06375 For 6an Orb Swivel Banjo To 3 8in Sae Male (42.7% similar) Manufacturer: Radium Engineering, part number: 20-1000-06375, condition: new: 6AN orb swivel banjo to 3/8IN sae male this fitting screws into any female 6AN port and provides a 360 degree swiveling 3/8 quick connect male. This low profile fitting is safe for use with all fluids...(January 7th, 2025)
• Radium Engineering 20-0599 For Pump Outlet Adapter Extended (47.1% similar) Title: 20-0599 pump outlet. Manufacturer: Radium Engineering. Part number: 20-0599...(January 14th, 2025)
• Radium Engineering 20-0590-fl (50% similar) The compatibility section is not always 100% accurate. Fast free, shipping: brand Radium Engineering, part number 20-0590-FL, UPC code, condition new. The color, quantity, size, etc. May not be accurate...(January 26th, 2025)
• Radium Engineering 20-0796-00 Fuel Pump Hanger For Acura Integra And Honda (56.4% similar) Enhance your fuel system with the Radium Engineering 20-0796-00 dual pump add-on for 1994 -2001 aura integral and 1992 -2000 Honda civic. Features: dual pump capability: allows for installation of a second fuel. Perfect for performance enthusiasts looking to maximize their engines potential...(January 28th, 2025)
• Radium Engineering 14-0632 (45.5% similar) Photos are for reference only. Actual product may differ from the item shown in photograph. Wrench-together 6AN 45-DEGREE hose end for use with Radium universal PDF hose kits...(February 2nd, 2025)